BOAT KIT EXHAUST SYSTEM
 

The ENFORCER Wet-Tuned Exhaust System was designed to produce more power yet be neatly concealed inside the hull. It took many years of development and testing to bring to the market what we feel is the best sport performance exhaust system available. This exhaust system has been engineered to operate with a continuous flow of water injected into the header and exiting the pipe. The injected water maintains a low operating temperature, which enables you to operate your boat for as long as you choose without the danger of extreme heat damage. This system has become the most popular choice of exhaust for performance minded sport boaters. The entire exhaust system is manufactured out of Machined and Die-Cast Aluminum.

pic

Prior to the water entering the exhaust header it circulates through the exhaust manifold. Extreme heat is generated at this point, and care has been taken to control the correct amount of water flow to maintain performance yet keep operating temperatures low.

pic

Water is supplied to the cooling system from our adjustable water pick-up mounted to the back of the transom. From here it is directed into the water pump.

pic

Shown here is our vacuum actuated water pump that is powered by a negative and positive pulse that is created in the engines crank case under operation. The vacuum from the engine is supplied to the pump by means of Neoprene Tubing. At idle, the pump will draw water from the water pick-up and circulate through the water jacket on the engine, then through the exhaust manifold, and finally through the tune pipe where it is expelled to the outside of the boat. Once the boat reaches planing speed the incoming water pressure bypasses the pump action and continues the cooling process with the pump reactivating once the boat/engine returns to idle. This system can operate for as long as you choose maintaining proper engine and exhaust temperatures. This is nearly a no-maintenance system.

pic

Shown here is the exit of the tune pipe which is located at the bottom left of the transom. Only two inches of the pipe system is visible making this the best system available for the scale minded boater.

pic